Bumble Bee Garden Yard Art Made with Metal Coffee Can

I’m getting ready for spring and working on several new DIY craft projects for my outdoor living and garden areas. I enjoy adding a few new items every year to add style and a pop of color. One thing that I really like is junk yard art…where you upcycle several items and turn them into a new piece of garden yard art. That’s exactly the type of craft project that I’m featuring today. Check out the cute ladybug version of this project that we made. Adorable!

* This post may contain affiliate links.

Bumble Bee Garden Yard Art

1 Metal Coffee Can
2 Metal Bottle Caps
1 Plastic Water Bottle (clear)
Acrylic Craft Paints – Yellow, Black, White and Red
Modge Podge with Glossy Finish
Paint Brush, Foam Brush, Water Dish, Paper Towels
2 Metal Screws
Gorilla Glue
Plastic or Metal Stake
Drill
Scissors

Wash and thoroughly dry the coffee can, bottle caps, and water bottle.

To get the acrylic craft paint to stick really well to the metal I coated it with one thin layer of Modge Podge using a foam brush. Let it thoroughly dry. Once dry you’ll want to paint the yellow and black bumble bee stripes as shown in the photograph. You can make them as thick or as thin as you personally like. I opted to paint the bottom of the can yellow, but you can certainly paint it black.

The can that I used came with a black plastic lid, so I didn’t have to paint it. If your’s is a different color…cover the plastic with Modge Podge, let dry and then paint the entire lid black (2 coats of paint) and let throughly dry. Paint both of the metal bottle caps with 2 coats of black acrylic paint. Once dry, do the white area on the eyes and then the black pupil as shown in the photograph. Let dry. Once dry use Gorilla Glue to attach the bottle caps onto the lid. Use red paint to make the nose and mouth. Let dry.

My husband was kind enough to drill 2 holes into the metal can for me and then inserted the 2 metal screws. They should be placed slightly at an angle, not straight up and down. We picked up a $1.25 outdoor solar light from Dollar Tree and used the stake that came with it as the stake for the Bumble Bee. It’s made out of plastic. He used a drill bit the diameter of the stake and made a hole in the bottom (the belly) of the metal coffee can. Inserted the stake and has it held in place with a bolt. We then used a generous amount of Gorilla Glue to hold the stake and bolt in place and left it dry overnight (that’s all inside the can).

Use scissors to cut the top and bottom off of a plastic water bottle. You’ll have a ring which you’ll cut open down the seam to make the wings. Flatten them out a little bit. Use a generous amount of Gorilla Glue (dries clear) to attach them on top of the Bumble Bee. I used 4 clip-on wooden clothespins to hold it into place until the glue was dry & set.

To finish up you want to protect your new piece of artwork. I opted to coat the entire thing with 2 coats of Modge Podge in a glossy finish. I made sure that I coated the can, screws, bottle caps, the plastic lid and even the plastic stake. This will help protect it from the weather elements when displayed outside in your garden. Let dry overnight.

Note: As soon as our ground thaws I will take it outside and place it into one of my flower beds and get better photographs of it. In the meantime…you can get started gathering together the supplies to make it.

* This post contains affiliate links. If you make a purchase, we may or may not receive a small commission which helps to support this site. Thank you!